软管泵-路沿石成型机服务至上

多用途移动泵站的主要用途：
多用途移动泵站基于泵设计开发，大流量软管泵是市政给排水中常用的一种泵型，拥有大量的潜在用户，其产品主要用于污水、初沉污泥、浓缩污泥等的抽排输送。由于转子泵具备自吸能力强、耐干转、流量范围大、耐磨损的特点受到国内设计单位和使用单位的青睐。

The main purpose of the multi-purpose mobile pumping station:
The multi-purpose mobile pumping station is based on the design and development of a pump. The large-flow hose pump is a type of pump commonly used in municipal water supply and drainage. It has a large number of potential users. Extraction delivery. Rotor pumps are favored by domestic design units and users due to their strong self-priming ability, resistance to dry running, large flow range and wear resistance.

工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.