【软管泵】混凝土抛丸机懂您所需

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

BW软管泵的基本结构<br />

往复泵由动力段和液力端两大部分组成。<br />
动力端的功能，是将动力机的回转运动转变为活塞(或柱塞)的直线往复运动。它包括传动离合装置、变速减速装置和曲柄连杆。它们的相互位置与安排决定着泵的总体结构型式，决定着泵的驱动方案及结构方案的选择。动力端的主要零部件包括皮带轮，离合器曲轴箱体及其中的传动轴，齿轮副，曲轴，连杆及十字头滑块。<br />！